低轨Walker星座构型偏置维持控制方法分析

针对低轨（low earth orbit,LEO）Walker星座构型稳定性维持问题，分析了低轨卫星的轨道摄动和星座构型稳定性的影响因素。通过分析低轨Walker星座的轨道摄动和相对漂移特点，提出了两次偏置策略。首先，依据未偏置时星座相对漂移量拟合得出第一次偏置时的偏置量。然后利用第一次偏置后的相对漂移量拟合得出第二次偏置量，消除残余项影响。两次偏置量叠加，使相对漂移大大降低。结果表明，低轨Walker星座中各卫星的初始参数偏差造成了升交点赤经和沿迹角相对漂移的发散，两次偏置策略可将两种星座的相对漂移量降至0.1°以下，证明了策略的有效性，提高了星座构型稳定性。     

飞机液压系统柱塞泵热分析

随着飞机液压系统向高压化、大功率化方向发展，液压系统的发热及温升问题受到了广泛关注。柱塞泵作为液压系统中重要的能量转换装置，对液压系统的功率损失和温度有重大的影响，良好的柱塞泵的热分析对液压系统的热设计和温度控制有重要的意义。然而传统的柱塞泵热分析方法，如平均油温法、软件仿真法和热节点网络法，因不够准确、高效和简洁而不能满足现代飞机液压系统热分析和热设计的相关需求。本文针对飞机液压系统柱塞泵发热的相关问题，采用基于集总参数的热网络分析方法，建立了柱塞泵热网络模型，通过对柱塞泵不同工况下的仿真，验证了模型的有效性和准确性，为柱塞泵及液压系统的热分析提供了参考。     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

连续式风洞二喉道调节马赫数控制策略

为了降低连续式跨超声速风洞压力波动,提高马赫数稳定性,需要对二喉道调节马赫数控制方式进行研究,针对现有文献鲜少对该控制策略描述等问题,以0.6m连续式跨声速风洞为例,对二喉道控制马赫数的原理进行分析,基于运动控制器加伺服驱动器双PID(proportion-integral-derivative)控制模式实现二喉道位置精确控制,提出了二喉道和压缩机转速的组合控制流程,并采用分段变参数模糊PID加串级控制的算法实现马赫数精确控制,最后进行了试验验证。结果表明马赫数控制精度优于0.001,且每个马赫数极曲线(9个攻角阶梯)的时间可控制在4min以内,证明所提出的控制策略是有效的,可为连续式跨超声速风洞的设计调试提供参考。      

谐振式加速度计自激振荡电路性能评价方法的研究

针对谐振式加速度计成品率不高、精度低等问题，以石英振梁加速度计为例，采用引进标准信号，将谐振电路作为“黑盒子”，对其开展独立的评价。通过评价电路的驱动电压幅值稳定性、移相稳定性、全温幅值/相位对称性等指标，与加速度计实际指标建立了一一对应的关系，为加速度计研制与性能提升提供了有效依据。实际运用表明，电路噪声性能、温度性能大幅提升，产品成品率从70%提高到了约90%。     

基于双滤波器的高精度目标跟踪估计方法

针对连续推力的合作航天器，采用双重无迹卡尔曼滤波(DUKF)算法估计其状态和加速度。通过状态滤波器和参数滤波器的配合，提升滤波精度，完成运动状态和参数的估计，从而实现合作目标的运动轨迹跟踪。与合作航天器相比，非合作航天器存在大小未知、发生时刻未知的机动，无法获得加速度，且信息获取和运动状态的估计难度大。针对非合作航天器，基于简化的相对运动方程，结合天基平台获得目标的观测信息，采用两个扩展卡尔曼滤波(EKF)及基于半正焦弦的机动检测策略实现多未知脉冲机动的运动状态的估计。仿真结果表明：相比于无迹卡尔曼滤波（UKF），DUKF在对合作航天器的状态和加速度估计方面具有更快的收敛速度和更高的滤波精度；对于存在未知机动的非合作航天器，通过对比验证机动检测策略与滤波器切换策略相结合的方法的有效性，该方法能够检测到多次机动并且减少误判。     

前缘缝翼构型平尾直升机气动特性分析

使用数值模拟方法研究了前缘缝翼翼型气动特性,并将该前缘缝翼翼型应用于直升机平尾,分析了该直升机全机气动特性,最后通过风洞试验对数值模拟结果进行验证。结果表明,前缘缝翼构型平尾能有效改善直升机的纵向静稳定性。     

基于6σ设计的复合推力高速直升机总体参数多目标优化

针对复合推力高速直升机总体设计阶段总体参数的选择问题,提出一种提高可靠性和鲁棒性的基于6σ设计的改进多目标遗传算法优化方法。采用叶素理论和数值积分的方法分析计算了复合推力高速直升机气动及飞行性能,并以此为基础建立了约束函数和初步目标函数模型;将6σ设计融入改进的多目标遗传算法中,构造最终目标函数;在给定有效载荷设计要求下,对复合推力高速直升机总体参数进行了多目标优化设计。该方法获得了所需的Pareto解,优化后的复合推力高速直升机飞行性能相对原机有了较大改善,算例结果表明该方法有效可行。     

面向空间天线的TWF复合材料性能研究

利用碳纤维三向编织物（triaxial woven fabric，TWF）作为增强材料，与柔性基体材料硅橡胶复合，制成兼具一定柔性和刚性的复合材料壳膜结构，用于卫星天线反射器，是一种新型的高精度可展开天线实现方案。采用复合材料细观方法，对碳纤维增强硅橡胶TWF复合材料进行了力学性能的研究。首先由纤维和基体的材料特性得到均质纤维束的材料特性；接下来考虑纤维束交织情况（起伏波动）建立由纤维束组成的单胞实体有限元模型；然后对单胞实体有限元模型进行均匀化分析，施加周期性边界条件，最终得到等效的均质材料特性；为满足天线反射器高性能需求，分析了碳纤维种类、纤维体积分数对单胞等效性能的影响规律。对该材料力学性能的研究，可以为其未来应用于大型高精度可展开天线反射器提供一定的理论依据。     

Experimental and numerical investigation on surface quality for two-point incremental sheet forming with interpolator

The unsatisfied surface quality seriously impedes the wide application of incremental sheet forming (ISF) in industrial field. As a novel approach, the interpolator method is a promising strategy to enhance the surface quality in ISF. However, the mechanism for the improvement of surface quality and the influence of interpolator properties on surface roughness are not well understood. In this paper, the influences of process variables (i.e. tool diameter, step size and thickness of interpolators) on the forming process (e.g. surface roughness, forming force and geometric error) are investigated through a systematic experimental approach of central composite design (CCD) in two-point incremental sheet forming (TPIF). It is obtained that the increase in thickness of interpolators decreases the surface roughness in direction vertical to the tool path while increases the surface roughness in direction horizontal to the tool path. Nevertheless, the combined influence between thickness of interpolators and process parameters (tool diameter and step size) is limited. Meanwhile, the placement of interpolator has little influence on the effective forming force of blank. In addition, the geometric error enlarges with the increase of step size and thickness of interpolator while decreases firstly and then increase with an increase in tool diameter. Finally, the influencing mechanism of the interpolator method on surface quality can be attributed to the decrease of the contact pressure due to the increase of contact area with the unchanged contact force. Meanwhile, the interpolator method eliminates the sliding friction on the surface of blank due to the stable relative position between the blank and the interpolator.